Sunday, November 22, 2015

Considering DBA 3.0

One of my first ventures into ancient/medieval wargaming was De Bellis Antiquitatis (or DBA for short).  I believe it was 2008/2009 when my friend Mark introduced me to a simple, quick play historical game.  I was skeptical at first, not really needing another game to get into, but after a few rounds I was hooked.  It had just what I was looking for with small armies (12 bases per army, not counting optional units) and it was also a lot of what I liked about the SCA (Society for Creative Anachronism - another long-term hobby) in that you could either do strict historical scenarios or a free-for-all with history.  Soon we had about a half-dozen players at the store, with everyone wanting to give it a try.  The game was cheap enough to make this possible, no matter how strapped you were with your other games, putting a whole army together for less than $20 was easy enough.

Anyway, eventually this fell to the side for me, though I never got rid of my models.  Even my unassembled armies (I had purchased several that I never got around to) are still in my model box.  This past week I had the pleasure of meeting another local gamer who has a lot of experience with wargames, and eventually we got to talking about DBA.  I knew it was moving into 3.0 with the rules edition, though I had not had an opportunity to play it yet.  I was mostly waiting around to see if I would need to get new armies (if any of the lists changed).  Turns out, they didnt.  So my Romans and Huns (likely my Landsknechts, Byzantines, and Samurai as well) are still good.  Since I have not been able to sell off my almost finished Field of Glory Imperial Roman army, I might as well put it to use in DBA.

I may have to post some photos of what I have, as well as any side projects I get into.  One thing I really enjoyed about the game is that if I dont feel like setting aside a block of time to work on one of my current projects (I generally spend 3-4 hours per Flames of War platoon, give or take), I can do something for DBA in less than an hour.  A piece of terrain, a camp, a few bases of figures, whatever.  I can test out new methods, and if it doesnt work, who cares?

The game is played on a 2' x 2' board.  When I got into it Mark had several which I think were a part of some sort of modular game board system.  One was flat, another with a mountain on one corner, and another had some random hills.  The only one I ended up with was the flat one, figuring I could adjust the terrain as needed rather than having a permanent hill or other features on it.  Anyway, it is gone now, and I am left trying to find a new game board.

Some articles I have run across detail some creative ideas.  This article details making them out of plywood squares so you can mix and match as needed with built in terrain.  With that in mind, another article suggests the use of canvas squares (like, a painting canvas) with much of the same idea overall.  I like the idea of modular boards so you can change things around as well as having some of the terrain built into the table (something that has been fairly difficult for me to figure out without a dedicated gaming space).  Water, roads, fields and hills all look better when you can make it more permanent.

Camps are another easy terrain project.  I have a box full of random odds and ends I have collected over the past 5-6 years with the intent of building camps or towns with them.  Some pages that have excellent examples are here and on the fanaticus website here.

Anyway, I wanted to put some of my thoughts down and see how motivated I am to follow through on it.  I already have a lot on the bench currently, but if I find myself working on it, and maybe talking some of my fellow gamers in the area into trying it, I may just see how far along I can get things.


01JAN2016 Update - Between my inability to secure a copy of the rules and the abundance of other projects, DBA has been shelved again.  It seemed like a worthwhile idea, and if I had anyone interested in playing it locally, it would be worth looking into.  Until then, back into the box.

Saturday, November 21, 2015

From Start to Finish - Part 2 - Planning and Purchasing

So, I have decided on a game (Team Yankee), decided on a scale (6mm), now I need to start pricing out miniatures.  Considering the rulebook has not yet been released, I do not have much go to on.  The pre-release list of units that should be available gives me a rough guide to what I should be looking for, and the two box sets (Bannon's Boys and Potecknov's Bears) provide a baseline of what a 'starter' force should be.  This also gives me a good opportunity to show the differences in price.

Bannon's Boys ($90) contains:
5x Plastic M1 Abrams Tanks 
2x Plastic AH-1 Cobra Attack Helicopters 
1x Special Objective 
2x Decal Sheets 
7x Unit Cards 
1x Template

Potecknov's Bears ($120) contains:
9x Plastic T-72 Tanks 
2x Plastic MI-24 Hind Assault Helicopters 
2x Decal Sheets 
8x Unit Cards 
1x Template

Team Yankee Rulebook - $25.00 ($22.50 on sale/pre-order)


By comparison, the most expensive 6mm supplier (GHQ, which is also regarded as one of the best in quality) I would end up spending the following:

Bannon's Boys - 5x M1 Abrams, 2x AH-1 - $23.90
Potecknov's Bears - 10x T-72, 2x Mi-24 Hind - $47.80


I can get an equivalent number of models to both starter boxes and the rulebook for $94.20 (not counting tax, shipping, etc).  For a little over the cost of the least expensive box set, I can get everything I need to play.  For the purpose of gaming on the cheap, 6mm seems very much like the way to go.

Currently, I am torn between holding off on ordering any figures until the rules are available, and having two forces ready to go when the book does come out.  I think I may just order the basic items listed here to start, and expand once the rules are available so lists can be drawn up.  Otherwise, I may be tempted to buy one of everything, "just in case."  I may also have a work-related project to do in 6mm, so I can always tack that on with this order.

Once I have ordered everything I will post an unboxing and prep-work post to detail everything.

Edit - 27 November 2015: GHQ ran a decent Black Friday sale, so I picked up enough to run a 75 point force for both US and USSR (which really was not much in the way of figures).  

Wednesday, November 18, 2015

From Start to Finish - Part 1 - New Game, New Army

One of my goals has been to detail how I select a game to play and put a collection of models together, then to record the whole process (with pictures).  I had a great opportunity to do so when I started up a Soviet Tankovy for Flames of War a few months ago, but in my rush to get it up and running I completely forgot about documenting it.

Luckily, I have another opportunity.  Battlefront is set to release a new game this month next month, called Team Yankee.  Based on the novel by Harold Coyle (currently available on Amazon in the Kindle store), it details a what-if scenario of WW3 set in Germany in 1985.  I am about half-way through the book, but by chapter 2 I had already pre-ordered the rulebook.  Armor-based units were what got me into Flames of War, and this looks to be along those lines.  The M1 Abrams vs the T-72, Cobras vs Hinds, and A-10's busting up Soviet tanks.  Initially the previews did not really hook me, but the book has.

So, now I have another game to play.  But, this one is different, because even though Battlefront is providing a range of 15mm models for the game (of which I may pick up a few individual ones, for Force on Force if nothing else.. they do look good), it seems there is a fairly large community of players who are going to be playing it in 6mm.  Micro-armor is a field I never really got into up until this point.  I briefly considered Epic Warhammer 40,000 when I was in Colorado, but that was about it.  Technically Battletech is in the same scale.  6mm is 1:285 scale, though from what I am reading it is pretty much the same as 1:300, as well as being pretty much the same scale the military uses.

Now I have a game I am interested in, with a new scale people are actually using.  So it is time to start researching what I will need.  Some useful links I have found so far are listed below:

http://www.ghqmodels.com/store/military-models-modern-micro-armour.html
http://www.pfc-cinc.com/front_page.html
http://6mm.wargaming.info/index.htm

At this point, I have a plan.  Next step will be to get an idea of what models I need and who I will be ordering them from.


Continued in: From Start to Finish - Part 2 - Planning and Purchasing